Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Fiat Mobi?

Model: Fiat Mobi MK 1 - Years 2016-2024
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin air filter in the Fiat Mobi, a very simple and quick operation. First, locate the filter; it is located under the dashboard on the passenger side, at the junction between the center tunnel and the dashboard itself. To access it, slightly move the carpet and remove the two screws securing the long rectangular cover. Once you have done this, you can pull out the old filter, clean the housing of any debris and dirt, and install the new one, making sure to position it correctly.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Fiat Mobi
How to Change the Cabin Filter on a Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) This video shows the procedure to change the cabin filter in your Fiat Mobi. First, position yourself on the passenger side and locate the filter, wh…
How to Replace the Ignition Coil in a Fiat Mobi
How to Replace the Ignition Coil in a Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) This guide provides instructions for removing and replacing the ignition coil in a Fiat Mobi, following these simple steps. First, open the hood of y…
How to Replace the Starter Motor on the Fiat Mobi
How to Replace the Starter Motor on the Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) If you want to perform a DIY replacement of the starter motor on this vehicle, follow the instructions below and also check the tutorial video. After…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos