Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Engine of the Fiat 124?

Model: Fiat 124 MK 1 - Years 1966-1985
Part: Engine

To install the engine of the Fiat 124, first position the oil sump, securing it with the appropriate screws. Next, screw in the bolts that secure the camshaft panel; this must then be covered on its upper part by installing a specific cover. At this point, access the opposite side of the engine, where the various pulleys, water pump, and corresponding timing belt must be installed. When all these components are installed, you can insert the engine into its designated bay.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 124 (1966-1985 / MK 1) Removing the fuel filter on a Fiat 124. Here’s how to do it from inside the engine bay. Open the bonnet and locate the fuel filter as shown in the vi…
Fiat 124 (2016-2019 / MK 2) To complete the manual reset procedure for the maintenance light on your Fiat 124 Spider, simply follow the steps described below. First, get into th…
Fiat 124 (2016-2019 / MK 2) Before you can start, open the bonnet of your Fiat 124. First, unclip and move the hoses connected to the air filter housing, releasing the relevant …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos