Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Fiat 124
  6. : Engine

Fiat 124 - Engine

Fiat 124 (1966-1985 / MK 1)
How is the Fiat 124 engine mounted?

To be able to mount the engine of the Fiat 124, first of all you need to position the oil pan, fixing it with the appropriate screws. Subsequently, it will …read all…
Posted on 14 July 2022 by ScegliAuto
Fiat 124 (1966-1985 / MK 1)
Guide to disassemble the engine on the Fiat 124 Spider

In this short guide we will see the main instructions to be able to disassemble and remove the engine from the body on the first generation Fiat 124 Spider, …read all…
Posted on 26 February 2024 by ScegliAuto

Battery (1) Coil (1) Key (3) Timing belt (1) -board computer (2) Checks and maintenance (11) Air filter (1) Petrol filter (1) Clutch (1) Engine (2) Door panel (1) Radiator (1) Passenger compartment heating radiator (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos