Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the thermostat in the Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Thermostat

In this tutorial, we can see how to replace the thermostat in the Fiat Grande Punto, an extremely simple and quick operation. First of all, we wait for the engine to be completely cold, then we open the cap of the expansion tank, place a container below the radiator and, opening the appropriate valve, drain all the coolant in the system. We then locate the thermostat, disconnect the various pipes and connectors connected to it, and unscrew the two fixing bolts with a socket wrench. At this point, we can separate the thermostat from the engine, place the replacement, reassemble everything following the reverse procedure, and add new coolant.

Posted on 20 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat on a Fiat Grande Punto
How to Remove the Thermostat on a Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) How do you remove the thermostat on a Fiat Grande Punto? Watch this video to see where and how to remove the thermostat. Lift the bonnet, unscrew the…
How to Change the Thermostat on the Fiat Grande Punto 1.4
How to Change the Thermostat on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short video, we will see the main steps that will allow us to remove and replace the thermostat on the Fiat Grande Punto 1.4. First, open the…
How to Change the Thermostat on the Fiat Grande Punto 1.4
How to Change the Thermostat on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, discover the main instructions for removing and replacing the coolant thermostat on the Fiat Grande Punto 1.4 petrol. First, open the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos