Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Thermostat on the Fiat Grande Punto 1.4

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Thermostat

See other generations:
Video tutorial

In this video, discover the main instructions for removing and replacing the coolant thermostat on the Fiat Grande Punto 1.4 petrol. First, open the bonnet and start by removing the coolant reservoir, undoing the screws and disconnecting the fluid hose; then, remove the battery by disconnecting the terminals, as illustrated in the video.

Next, disconnect the main coolant hoses from the thermostat by unclipping their clips; then disconnect the electrical connector and undo the thermostat screws to remove and replace it!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Change the Thermostat on the Fiat Grande Punto 1.4
How to Change the Thermostat on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this short video, we will see the main steps that will allow us to remove and replace the thermostat on the Fiat Grande Punto 1.4. First, open the…
How to replace the thermostat in the Fiat Grande Punto?
How to replace the thermostat in the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will see how to replace the thermostat in the Fiat Grande Punto, a very simple and quick operation. First, wait for the engine …
How to Remove the Thermostat on a Fiat Grande Punto
How to Remove the Thermostat on a Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) How do you remove the thermostat on a Fiat Grande Punto? Watch this video to see where and how to remove the thermostat. Lift the bonnet, unscrew the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos