Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wing Mirror

Model: (Various brands) Various
Part: Side mirror

To remove and extract the external wing mirror, you will need to perform some preliminary steps, such as removing the panel that covers the inside of your vehicle at the same position as the mirror outside. If necessary, also remove the door panel. Then, remove the bolts securing the wing mirror and disconnect any plugs connected to the mirror to extract it. Finally, retrace the steps for reassembly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Need to replace the mirror glass if damaged? Here’s how to do it. Pry between the edge of the mirror frame and the mirror glass itself (use a plastic…
(Various brands) Various Is the car rear-view mirror damaged? Remove it from above the mirror and replace it. You can also repair it. Pry between the edge of the mirror frame…
(Various brands) Various Fitting the external wing mirror on the vehicle is very straightforward. Start the installation process by positioning the internal plastic of the mi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos