Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Car Rear-View Mirror

Model: (Various brands) Various
Part: Side mirror

Is the car rear-view mirror damaged? Remove it from above the mirror and replace it. You can also repair it. Pry between the edge of the mirror frame and the mirror glass. Keep prying until the glass separates from the mirror (disconnect the power cable if present). Finally, fit the new mirror: ensure the plastic clips snap into the mirror supports. Glue the mirror if it has come away from the plastic base that attaches above the mirror. Secure the mirror base at the end of the installation.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Let's look at the removal and replacement of the mirror on your car. Remove the internal trim part of the mirror (there are plastic clips), unscrew t…
(Various brands) Various Today, learn how to remove the external wing mirror from a generic car: the procedure may vary from car to car, but the main steps remain the same fo…
(Various brands) Various Do you want to replace the broken mirror from above the mirror of your car? Let's see how to disassemble the mirror. Pry between the perimeter of the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos