Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Glass from Car Mirror

Model: (Various brands) Various

In this very simple video tutorial, you will learn how to remove the glass from the external rear-view mirror of a generic car; the procedure may differ for newer or higher-value cars. First, adjust the mirror to allow leverage on the glass; then, gently and without breaking it further, remove it and replace it with the new one. Note that to replace it, the rear hooks must be intact; otherwise, the entire rear-view mirror will need to be replaced.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the External Mirror Glass
Replacing the External Mirror Glass
(Various brands) Various Need to replace the mirror glass if damaged? Here’s how to do it. Pry between the edge of the mirror frame and the mirror glass itself (use a plastic…
How to Change the Glass on a Wing Mirror
How to Change the Glass on a Wing Mirror
(Various brands) Various Do you want to change the damaged glass of the external mirror? Here’s how to remove the glass and fit the new one. Pry between the edge of the mirro…
How to Remove the Glass from Car Mirrors
How to Remove the Glass from Car Mirrors
(Various brands) Various Do you want to replace the broken mirror from above the mirror of your car? Let's see how to disassemble the mirror. Pry between the perimeter of the…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos