Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Clutch Cable

Model: (Various brands) Various
Part: Clutch

Video tutorial

Let's look at removing the car's clutch cable. Lift the bonnet and secure it, then, using a socket spanner, unscrew the locking pins of the clutch cable.

Start by removing the clutch cable fastening pins (as shown in the video). Once the bolts are unscrewed from their seat, remove them.

Pull the clutch cable out from inside the car. Once the cable is removed, assemble the new part in the engine bay. Finally, tighten the pins properly and test the correct operation of the clutch. Adjust its tension as necessary.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cable on a Yamaha YZ 125?
(Various brands) Various If the clutch cable on your motorcycle breaks, follow the instructions below and refer to the video tutorial. First, remove the old cable by unscrewi…
How to Replace the Motorcycle Clutch Cable
How to Replace the Motorcycle Clutch Cable
(Various brands) Various This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycl…
How to Replace the Clutch Cable on a Piaggio Ape 200
How to Replace the Clutch Cable on a Piaggio Ape 200
(Various brands) Various To replace the clutch cable on a Piaggio Ape 200, open the bonnet to locate the end of the cable connected to the clutch actuator. Disconnect this en…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos