Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Causes a Stiff Clutch Pedal Problem

Model: (Various brands) Various
Part: Clutch

Video tutorial

In the video, the stiff pedal problem is caused by two distinct factors that are interconnected: the stiff pedal, which then goes 'to the floor', is due to the failure of the clutch linkage (or hydraulic line), which, when subjected to abnormal pressure due to a defect or aging, initially feels stiff and resistant, as it is working at its limit, then gives way and breaks.

At that moment, the pedal loses resistance and 'goes to the floor', unable to transmit force to the clutch.

After repairing the hydraulic part, the car does not start because the starting system requires the clutch pedal to be pressed to activate the starter motor. In the case shown in the video, an attempt was made to start the engine without pressing the clutch, straining the starter motor: this caused a protection to trip on a relay module, resulting in the control unit no longer sending the start signal.


Posted on 29 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch Pedal?
(Various brands) Various To adjust the clutch pedal of any car, completely remove the panel located at the back of the pedal to access the actuator. Use a spanner to loosen o…
How to fix the clutch squeak problem
How to fix the clutch squeak problem
(Various brands) Various In this video, you will learn how to fix the clutch squeak problem. To resolve the issue, remove the plastic cover located under the clutch pedal. To…
How to discover that the clutch of our car has problems
How to discover that the clutch of our car has problems
(Various brands) Various To discover if our clutch has problems, there are various tests: the first one is the engagement point test. We need to put the car on a flat surface…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos