Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fix the clutch squeak problem

Model: (Various brands) Various
Part: Clutch

In this video, you will learn how to fix the clutch squeak problem. To resolve the issue, remove the plastic cover located under the clutch pedal. To remove the cover, press the two tabs of the plastic clip located just behind the clutch pedal. Once the clip is removed, take off the cover that is situated where the pump ball is. Depending on the condition of the cover, you can choose to replace it or grease it with silicone to seal any holes or imperfections. After this, refit the cover into its housing and close the plastic clip by pushing the two tabs until you hear a click.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to eliminate the squeak from the clutch pedal
How to eliminate the squeak from the clutch pedal
(Various brands) Various Let's see how to solve the problem of a squeaky clutch pedal: the first thing to do is identify the type of noise: if it is a sort of squeak, it is d…
How to recognize the symptom of a worn clutch disc
How to recognize the symptom of a worn clutch disc
(Various brands) Various In this video, it is very clearly illustrated what is the symptom that makes us understand that the clutch bearing (also called "thrust bearing") is …
How to solve the problem of the quick release trunk that vibrates
How to solve the problem of the quick release trunk that vibrates
(Various brands) Various How to solve the problem of the quick-release trunk that vibrates on our scooter? This video shows us how to do it. It is a problem that is especiall…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos