Do it yourself
Frequently asked questions about cars and motorcycles

How to eliminate the squeak from the clutch pedal

Model: (Various brands) Various
Part: Checks and maintenance

Let's see how to solve the problem of a squeaky clutch pedal: the first thing to do is identify the type of noise: if it is a sort of squeak, it is due to friction between plastic parts or on the piston of the master cylinder. If it is a metallic "click," it indicates wear on the nylon bushings of the pedal or the activation lever. In the first case, we clean the area around the piston stem, apply silicone spray by spraying it first on a cloth and then spreading it on the stem. If we use grease, we apply a small amount to the moving stem. We move the pedal several times to distribute the lubricant and the squeak will disappear. Do not use WD-40 or petroleum-based sprays, as they damage rubber seals, drying and swelling them; lithium or copper greases are also not suitable. If the problem is worn bushings, we disassemble the pedal, disconnect the clutch switch sensor, and replace the nylon bushings, which should be lubricated with specific silicone grease, and then reassemble everything.

Posted on 21 January 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, it is very clearly illustrated what is the symptom that makes us understand that the clutch bearing (also called "thrust bearing") is …
(Various brands) Various In this video, we can see a driving tip through which we are taught the correct way to lift our foot off the clutch, so that the car does not stall. …
(Various brands) Various The arrangement of the pedals in a vehicle with a manual transmission always follows the same pattern: clutch pedal, brake pedal, and accelerator ped…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos