Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Bushes of the Wishbone?

Model: (Various brands) Various
Part: Bushings

Video tutorial

To replace the bushes of the wishbone, you need to remove it from the car by taking off the corresponding wheel and unscrewing the bolts that secure the wishbone. Once the wishbone is extracted, you can remove the bush from its housing at the top using a socket spanner, following the instructions in the tutorial.

After the old bush has been removed, insert the new one into its housing; this will allow you to refit the wishbone and the corresponding wheel.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

(Various brands) Various In this video tutorial, you will see how to replace a car's wishbone: a wishbone allows the wheel to change position relative to the body or subframe…
(Various brands) Various The vehicle is equipped with a horn system, consisting of two horns of different tones: one high tone and the other low tone. The two horns are activ…
(Various brands) Various Removing the windscreen wiper arm can be a difficult task if you do not have the right tools, as the Torx screw that secures the arm tends to rust. T…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos