Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Horns of the Cacson

Model: (Various brands) Various
Part: Steering wheel

This video is currently unavailable

The vehicle is equipped with a horn system, consisting of two horns of different tones: one high tone and the other low tone. The two horns are activated simultaneously.

The horns are operated by pressing the side areas of the steering wheel cover (around the airbag). The horn circuit is protected by a specific fuse and controlled by a specific relay, located in the engine compartment fuse box. For safety reasons, the horns can be activated at any time, even with the key in the OFF position.

To remove the horn assembly, you need to remove the right wheel, the dust cover, and the wheel arch liner; the assembly is located behind the right headlamp, visible only from the wheel arch, with the two horns secured by a support and a screw to the right chassis rail.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Stand on the Aprilia Sportcity
How to Remove the Centre Stand on the Aprilia Sportcity
(Various brands) Various If you want to remove the centre stand on this motorcycle, you can follow the instructions provided in this video and also use the description below.…
How to Remove the Rear Wheel of a Vespa
How to Remove the Rear Wheel of a Vespa
(Various brands) Various If you need to remove the rear wheel of this vehicle, you can find the instructions in this description and also refer to the images in the video. Th…
How to Remove the Parking Sensor?
How to Remove the Parking Sensor?
(Various brands) Various Normally, a parking sensor refers to the sensor located in the rear bumper that alerts you when the car is a certain distance from an obstacle (anoth…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos