Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Stand on the Aprilia Sportcity

Model: (Various brands) Various

If you want to remove the centre stand on this motorcycle, you can follow the instructions provided in this video and also use the description below. Using two socket spanners, undo the supporting bolt of the stand. Once the nut is loosened, you can lay the scooter on its side to completely undo the nut. Before removing the pin, it is necessary to take off the return spring by leveraging with a screwdriver so that the pin can come out easily. This way, you will have completely removed the centre stand.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to mount the push&block stand on the scooter
(Various brands) Various The push&block stand is considered an innovation against motorcycle thefts. Its innovation allows you to park your vehicle safely, as the only way to…
How to Remove the Front Wheel on an Aprilia SR
How to Remove the Front Wheel on an Aprilia SR
(Various brands) Various If you need to remove the front wheel on this scooter model, perhaps because you have a flat tyre, the description below outlines the various steps a…
How to disassemble the transmission pulley of the Piaggio SI
How to disassemble the transmission pulley of the Piaggio SI
(Various brands) Various Today we will see the instructions that will allow us to disassemble and replace the transmission pulley of the Piaggio SI, but also of the Ciao and …

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos