Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the transmission pulley of the Piaggio SI

Model: (Various brands) Various

Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the transmission pulley of the Piaggio SI, but also of the Ciao and Garelli. First of all, we put the central stand and start removing the side cover of the transmission; then we unscrew the central nut of the transmission pulley, locking the transmission if necessary, as shown in the video.

At this point, we remove and replace the pulley, also replacing the belt or other transmission components if necessary; then we reassemble the pulley, applying the reverse procedure!


Posted on 11 February 2025 by ScegliAuto


Related tutorials

Replacing the Drive Belt on the Yamaha Tmax 530
Replacing the Drive Belt on the Yamaha Tmax 530
(Various brands) Various To replace the drive belt on this scooter, you must first remove the right side cover to access the transmission. Using a socket spanner, begin remov…
How to Remove the Air Conditioning Compressor Pulley?
How to Remove the Air Conditioning Compressor Pulley?
(Various brands) Various To remove the air conditioning compressor pulley, first completely dismantle the compressor to remove it from its housing. Once removed, locate the p…
Replacing the Crankshaft Pulley
Replacing the Crankshaft Pulley
(Various brands) Various If you hear a noise coming from the engine bay while the engine is running, and it intensifies as the revs increase, it is likely that the crankshaft…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Replace the Rear Shock Absorber on a Ducati Scrambler

To replace the rear shock absorber on a Ducati Scrambler, loosen the screws that secure it to its housing: these screws will be located at the bottom and the top of the shock absorber itself. Once the screws are loosened, the shock absorber can be removed from its position between the rear swingarm and the mudguard. Once the old part is removed, you can insert the new one: this way, it can be secured with the screws and ensure everything functions properly.

Watch the video!


by ScegliAuto

More videos