Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Conditioning Compressor Pulley?

Model: (Various brands) Various
Part: Checks and maintenance

To remove the air conditioning compressor pulley, first completely dismantle the compressor to remove it from its housing. Once removed, locate the pulley situated on its side. By unscrewing the bolts that secure the pulley to its housing, you can slide it off and remove it completely, allowing for a new one to be installed. Once the new pulley is installed, secure it with the bolts and remount the compressor in its place.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How Does the Car Air Conditioning Work?
How Does the Car Air Conditioning Work?
(Various brands) Various The air conditioning system installed in cars is activated by a compressor located in the engine bay, connected to it via a pulley and a V-belt. This…
How to Replace the Clutch Hub on an AC Without Removing the Compressor from the Car
How to Replace the Clutch Hub on an AC Without Removing the Compressor from the Car
(Various brands) Various Even though we don't know what car it is. The video is very specific: the procedure for changing the clutch hub is a basic procedure similar on many …
What happens if the pulley of the service belt breaks?
What happens if the pulley of the service belt breaks?
(Various brands) Various In this video we can see what happens if the pulley of the service belt breaks, usually built on a metal support screwed to the engine shaft and a pa…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos