Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reasons Why the Car Air Conditioning Doesn’t Work

Model: (Various brands) Various
Part: Air conditioner

In this video, we can see some reasons why the car air conditioning doesn’t work. The main reason is holes that may be present in the condenser, which is the front radiator; it is quite easy for this component to get damaged due to foreign objects being projected at high speed into the grille. The loss of refrigerant is detected only through special lenses and a UV light, which highlights the holes using the tracer mixed with the system's fluid. Unfortunately, to access this internal component, you need to dismantle almost the entire dashboard (as seen in the images of the video). Another cause could be the compressor, which leaks from the pulley bearing, or from the O-rings or compressor pipes. Other leaks may occur from the thermostat or from a damaged pipe, although the most common is from the recharge valve, which is the low-pressure (or high-pressure) valve.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Car Air Conditioning with a £7 Canister
How to Top Up the Car Air Conditioning with a £7 Canister
(Various brands) Various In this video tutorial, you will see how to top up the car's air conditioning with a £7 canister (available in 200g and 350g formats). This system ca…
Why is the car's air conditioning not working properly?
Why is the car's air conditioning not working properly?
(Various brands) Various One of the possible causes for the air conditioning not working is the clogging of the cabin air filter. As we know, the air conditioning uses the re…
How does the air conditioner in a car work?
How does the air conditioner in a car work?
(Various brands) Various In this beautiful animation we see how the air conditioner of a car works: the compressor is the heart of the system, compressing the refrigerant gas…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos