How to mount the push&block stand on the scooter (With video)

Do it yourself

Frequently asked questions about cars and motorcycles

Car tutorial (Do it yourself)

Motorcycle tutorial (Do it yourself)

Frequently Asked Questions

Model: (Various brands) Various
Part:

The push&block stand is considered an innovation against motorcycle thefts. Its innovation allows you to park your vehicle safely, as the only way to unlock it is to insert the appropriate key into the lock. Inside the kit, which can be purchased online, all the pieces to assemble it are included, as well as the key. To assemble the stand, we must park our scooter on a flat base and use pliers to remove the spring that supports the stand. Using a wrench, we unscrew the nut and remove the central shaft of the stand. We insert the new shaft and assemble the nut and the spring. We test the operation of the stand by pressing on the bolt to activate it and inserting the key to deactivate it.

Posted on 12 September 2025 by ScegliAuto

This video is currently unavailable

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!

by ScegliAuto

Related tutorials

Changing the Oil and Filter on the Kawasaki Versys

More videos