Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Windscreen Wiper Arm

Model: (Various brands) Various
Part: Windshield wipers

Video tutorial

Removing the windscreen wiper arm can be a difficult task if you do not have the right tools, as the Torx screw that secures the arm tends to rust. Today, with the help of this short video tutorial, you will learn how to remove the arm without using a puller.

Start by spraying some Svitol lubricant on the screw and the arm. Wait a few seconds and then proceed to remove it using slow, circular movements. After a few seconds, apply more force; you will notice that the arm will come off completely.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various If when you clean the car windshield there are streaks or the water is not properly swept away, the main cause is usually the windshield wipers that …
(Various brands) Various To remove the crankshaft of a car, you will need to completely open the engine to gain access to the components inside. Here, you must fully detach t…
(Various brands) Various To replace the fuel pump, you need to find the point of the carpet under which the part is located. Then, lift the carpet and loosen the fastening sc…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos