Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the windshield wiper brushes of a vehicle

Model: (Various brands) Various
Part: Windshield wipers

If when you clean the car windshield there are streaks or the water is not properly swept away, the main cause is usually the windshield wipers that may be worn out or excessively dirty. In these cases, we should lift the windshield wiper arm vertically and carefully check the condition of the wipers; if they are damaged, they will need to be replaced, but if they are still perfectly intact, simply cleaning them will be enough. In this case, spray some WD 40 on a microfiber cloth and clean the wipers. When no dirt is released on the cloth, reposition the wipers horizontally and activate them to check their correct functioning.

Posted on 18 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Clean Car Injectors
How to Clean Car Injectors
(Various brands) Various Here’s how to clean car injectors. Lift the bonnet and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors.…
How to clean the car engine?
(Various brands) Various Is it possible to clean a vehicle's engine independently? The answer to this simple question is YES, it is indeed possible to clean a vehicle's engin…
How to clean the inside of a headlamp
How to clean the inside of a headlamp
(Various brands) Various In this video tutorial, you can see how to clean the inside of a headlamp. Once you have removed the headlamp from your vehicle, take out the bulb to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos