Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Eliminate Squeaks from Inside the Bodywork

Model: (Various brands) Various
Part: Body

In this video, you will learn how to remove some squeaks that you may hear inside your vehicle, often coming from plastic parts that do not fit perfectly. You will need a plastic spatula that does not scratch. In this case, the squeak comes from the internal handle of the vehicle; use the spatula to lever it starting from the bottom, and then gently detach it. If you look at the handle inside, you will see some tabs that need to be greased to stop them from making noise. Do the same in the housing on the opposite side. Then reinsert it, and you will notice that it no longer squeaks. Clean it well to ensure that grease hasn’t soiled the exterior, and you’re done. Repeat on the other side.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to eliminate the squeak from the clutch pedal
How to eliminate the squeak from the clutch pedal
(Various brands) Various Let's see how to solve the problem of a squeaky clutch pedal: the first thing to do is identify the type of noise: if it is a sort of squeak, it is d…
How to Remove Minor Bodywork Damage
How to Remove Minor Bodywork Damage
(Various brands) Various In this video, see how to eliminate or reduce the visibility of minor bodywork damage, such as chipping (i.e., marks from gravel kicked up by precedi…
How to eliminate brake noise in your car?
How to eliminate brake noise in your car?
(Various brands) Various It does not happen often, but it may occur that you hear noise when braking with your car, particularly a squeal. In the attached video, you can find…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos