Do it yourself
Frequently asked questions about cars and motorcycles

How to Fix a Car Bonnet That is Stuck Closed

Model: (Various brands) Various
Part: Body

Video tutorial

In this video, we address the issue of a car bonnet that is stuck closed. The main causes can vary: a broken or disconnected internal release lever, a snapped or detached release cable from the lock mechanism, a weak bonnet spring (which no longer pushes the bonnet after release); a jammed safety mechanism (the secondary latch does not open), not to mention that rust or dirt in the lock can prevent movement.

The first step is to check the internal lever: if it is detached, grasp the cable with long-nose pliers and pull. Alternatively, apply lubricant (WD-40) into the bonnet lock, then tap lightly while an assistant pulls the lever.

If the cable is intact but the lock is jammed, try to act directly on the mechanism by looking through the grille at the front of the bonnet and using a long screwdriver to press the secondary release lever. If the spring is weak, manually lift the bonnet while an assistant pulls the lever.

If all else fails, you may need to call a mechanic: it might be necessary to access from underneath to unlock the mechanism.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

(Various brands) Various In this video, we can see one of the many valid methods we can use to remove a CD that has become stuck in the CD player of our car. We need an old C…
(Various brands) Various Today, you will learn how to remove a stuck CD from the car CD player using two cards and some adhesive tape. Place the tape between the cards and in…
(Various brands) Various When a vehicle's sunroof gets stuck, the main cause is often a foreign object lodged in it. In such cases, remove the object or debris to free the su…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos