How to Replace the Clutch Cable on a Yamaha YZ 125?

Model: (Various brands) Various
Part: Clutch

If the clutch cable on your motorcycle breaks, follow the instructions below and refer to the video tutorial. First, remove the old cable by unscrewing the securing screws of the clutch housing and then pull the cable out of the sheath from the engine side. Take the new cable and insert it into the sheath from the handlebar side. Next, secure the cable to the clutch lever on the handlebar and attach the other end of the cable to the clutch itself. Tighten the securing screw of the cable on the clutch and refit the clutch cover.

Updated on 6 July 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

Handle - Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Replace the Clutch Cable on a Yamaha YZ 125?

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos