Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the clutch lever on the motorcycle, start by removing the protective rubber; once the rubber is off, loosen the cable by turning the screw; after loosening the cable, unscrew the lower nut of the lever with an Allen key and the upper screw with a flat screwdriver, remove the screw holding the lever, take the lever out of the insert, and slide the cable and bush off the lever. Now take the new lever, insert the cable and bush into the lever, screw in the upper lever screw with a flat screwdriver, tighten the lower nut with an Allen key, pull the cable adjusting it from the adjuster, and reposition the protective rubber. Also adjust the lever distance and set the lever length by tightening with an Allen key.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Lever on a KTM 125 Motorcycle
How to Replace the Clutch Lever on a KTM 125 Motorcycle
(Various brands) Various In this short video, you will see how to replace the left lever (which represents the clutch) on the KTM 125 motorcycle. First, use pliers to unscrew…
How to Replace the Motorcycle Clutch Cable
How to Replace the Motorcycle Clutch Cable
(Various brands) Various This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycl…
How to Change Gears on a Motorcycle
How to Change Gears on a Motorcycle
(Various brands) Various Changing gears on a motorcycle is not easy for beginners: most motorcycles have a sequential gearbox with the pattern shown in the video: 1st gear do…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos