Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in the BMW S1000 R

Model: Bmw S1000r
Part: Antifreeze coolant

Video tutorial

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes.

Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on a BMW S1000 R
How to Replace the Engine Oil and Oil Filter on a BMW S1000 R
S1000r In this guide, we will discover the instructions on how to perform the routine maintenance service by replacing the engine oil and oil filter on the …
Replacing the front brake pads on the BMW S1000 R
Replacing the front brake pads on the BMW S1000 R
S1000r In today's video, you will see how to remove and replace the front brake pads on a BMW S1000 R, following the instructions below. First, unscrew the …
How do you replace the brake pads of the BMW S1000 R?
How do you replace the brake pads of the BMW S1000 R?
S1000r The brake pads of the BMW S1000 R can be replaced by loosening the screws that secure the brake caliper corresponding to its housing: once the calipe…

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos