Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Kawasaki Ninja 1000
How to replace the air filter of the Kawasaki Ninja 1000
Ninja 1000 These short and simple steps will show us how to disassemble and replace the air filter of the engine of the Kawasaki Ninja 1000 motorcycle. First, w…
How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 1000?
How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 1000?
Ninja 1000 As shown in this tutorial, replacing the front headlight bulbs on the Kawasaki Ninja 1000 is a very simple and quick operation. Before proceeding, en…
How do you adjust the clock on the instrument panel of the Kawasaki Ninja 1000?
How do you adjust the clock on the instrument panel of the Kawasaki Ninja 1000?
Ninja 1000 Today we will explain how to independently adjust the clock on the instrument panel of the Kawasaki Ninja 1000. To perform this simple operation, we …

How to Replace the Rear Indicator Bulb on the Sym Mio

To replace the rear indicator bulb on the Sym Mio, you need to loosen the screws that secure the rear fairing of the motorcycle: to do this, you will also need to open the under-seat compartment and loosen the screws that secure the fairing from the inside. Once it is released, you can completely detach it and disconnect the connector attached to the corresponding bulb. The bulb can now be extracted from its housing, allowing you to insert the new one: this way, you can reassemble all the removed parts to ensure everything works correctly.

Watch the video!


by ScegliAuto

More videos