Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Kawasaki Ninja 1000

Model: Kawasaki Ninja 1000
Part: Air filter

Video tutorial

These short and simple steps will show us how to disassemble and replace the air filter of the engine of the Kawasaki Ninja 1000 motorcycle. First, we put the motorcycle on the stand and start by removing the rider's seat; then we unscrew the screws of the side plastic fairing and the fuel tank cover, in order to access the air filter box, as shown in the video.

Now we remove the air filter cartridge and replace it with the new one, installing it in the correct direction; we reassemble the fuel tank cover and fairing, finally fixing the seat!


Posted on 9 February 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?
How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?
Ninja 1000 In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat…
How do you adjust the clock on the instrument panel of the Kawasaki Ninja 1000?
How do you adjust the clock on the instrument panel of the Kawasaki Ninja 1000?
Ninja 1000 Today we will explain how to independently adjust the clock on the instrument panel of the Kawasaki Ninja 1000. To perform this simple operation, we …
How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 1000?
How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 1000?
Ninja 1000 As shown in this tutorial, replacing the front headlight bulbs on the Kawasaki Ninja 1000 is a very simple and quick operation. Before proceeding, en…

How to replace the piston on the Peugeot Django?

To replace the piston on the Peugeot Django, you need to completely dismantle the side fairings located under the seat: by removing these panels, you will gain access to the engine, which can be extracted from its housing by unscrewing the fixing screws and disconnecting the connectors attached to it. Once the engine is free, loosen the bolts that secure the cylinder at the top, remove the cylinder, and then detach the piston from the corresponding connecting rod. At this point, you can insert the new piston, cover it with the cylinder, and reinstall the engine in its place.

Watch the video!


by ScegliAuto

More videos