Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Ninja 1000
Part: Clock

Today we will explain how to independently adjust the clock on the instrument panel of the Kawasaki Ninja 1000. To perform this simple operation, we need to turn on the instrument panel, then insert the key into the ignition switch and start the instrument panel without turning on the engine. Press the buttons on the display of the instrument panel to access the clock menu. Hold down button A to adjust the hours and press button B to confirm the choice. Follow the same steps to adjust the minutes. Return to the main menu and turn off and then turn on the instrument panel again.

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 1000?
How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 1000?
Ninja 1000 As shown in this tutorial, replacing the front headlight bulbs on the Kawasaki Ninja 1000 is a very simple and quick operation. Before proceeding, en…
How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?
How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?
Ninja 1000 In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat…
How to replace the air filter of the Kawasaki Ninja 1000
How to replace the air filter of the Kawasaki Ninja 1000
Ninja 1000 These short and simple steps will show us how to disassemble and replace the air filter of the engine of the Kawasaki Ninja 1000 motorcycle. First, w…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos