Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw S1000r
Part: Engine oil

In this guide, we will discover the instructions on how to perform the routine maintenance service by replacing the engine oil and oil filter on the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the oil filter cartridge using the appropriate tool and install the new one. Now, unscrew the filler cap and top up with new oil, following the specifications indicated in the owner's manual.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant in the BMW S1000 R
How to replace the coolant in the BMW S1000 R
S1000r Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand…
How to change the engine oil of a BMW S1000R?
How to change the engine oil of a BMW S1000R?
S1000r To change the engine oil of a BMW S1000R, start by positioning the motorcycle on a flat surface and lifting it with a center stand or appropriate sup…
How do you replace the headlight bulb of the BMW S1000 R?
How do you replace the headlight bulb of the BMW S1000 R?
S1000r To replace the headlight bulb of the BMW S1000 R, you need to loosen the screws that secure the windshield to its housing at the front of the motorcy…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos