Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Clutch Lever on a KTM 125 Motorcycle

Model: (Various brands) Various
Part: Clutch

In this short video, you will see how to replace the left lever (which represents the clutch) on the KTM 125 motorcycle. First, use pliers to unscrew the upper and lower screws of the lever. Next, remove the cable and the gear contained within the clutch. At this point, take the new lever that will replace the old one, insert the gear inside it, and secure it by turning clockwise. Then, secure the lever with the cable and gently reinsert the screws, taking care not to strip the housing. The clutch will now be replaced.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycl…
(Various brands) Various If the clutch cable on your motorcycle breaks, follow the instructions below and refer to the video tutorial. First, remove the old cable by unscrewi…
(Various brands) Various In this video, you will learn how to adjust a cable clutch: this system is applicable to most models. The cable must be adjusted neither too tight no…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos