Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Motorcycle Clutch Cable

Model: (Various brands) Various
Part: Clutch

This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycle clutch cable as soon as it starts to deteriorate; otherwise, its operation will be compromised. When the clutch lever begins to feel loose, it means the cable needs replacing. First, unscrew the clutch cable from the lever on the casing. Then cut one end of the cable and pull it out. Lubricate the new cable and insert it into its sheath. Now pass the cable through the adjuster and place the block in the lever's housing. Place the block at the other end of the cable. Leave the lever at rest and measure the cable with the block in its housing. At this point, tighten the block and insert it into its housing as shown in the video.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cable on a Yamaha YZ 125?
(Various brands) Various If the clutch cable on your motorcycle breaks, follow the instructions below and refer to the video tutorial. First, remove the old cable by unscrewi…
How to Adjust a Cable Clutch on a Motorcycle
How to Adjust a Cable Clutch on a Motorcycle
(Various brands) Various In this video, you will learn how to adjust a cable clutch: this system is applicable to most models. The cable must be adjusted neither too tight no…
Removing the Car Clutch Cable
Removing the Car Clutch Cable
(Various brands) Various Let's look at removing the car's clutch cable. Lift the bonnet and secure it, then, using a socket spanner, unscrew the locking pins of the clutch ca…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos