Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust a Cable Clutch on a Motorcycle

Model: (Various brands) Various
Part: Clutch

Video tutorial

In this video, you will learn how to adjust a cable clutch: this system is applicable to most models. The cable must be adjusted neither too tight nor too loose, as the play in the lever must be just right to allow the clutch to engage and disengage properly.

Remove the outer casing to access both the locking screw and the threaded cable. If the clutch disengages too early, the motorcycle will start too soon, so loosen the screw, then unwind the cable to reduce the play - this will facilitate gear engagement.

However, if you extend it too much, the clutch will always be engaged, never disengaging, which can cause it to burn out. Therefore, you need to loosen the screw and tighten the block. Keep in mind that the clutch is very sensitive to temperature changes.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Motorcycle Clutch Cable
How to Replace the Motorcycle Clutch Cable
(Various brands) Various This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycl…
How to Replace the Clutch Cable on a Yamaha YZ 125?
(Various brands) Various If the clutch cable on your motorcycle breaks, follow the instructions below and refer to the video tutorial. First, remove the old cable by unscrewi…
Removing the Car Clutch Cable
Removing the Car Clutch Cable
(Various brands) Various Let's look at removing the car's clutch cable. Lift the bonnet and secure it, then, using a socket spanner, unscrew the locking pins of the clutch ca…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos