Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Oil and Filter on the Kawasaki Versys

Model: Kawasaki Versys 650
Part: Engine oil

Video tutorial

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine.

Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug.

Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Replace the Engine Oil and Oil Filter on a Kawasaki Versys 650
Replace the Engine Oil and Oil Filter on a Kawasaki Versys 650
Versys 650 Today, in this guide, we will discover the procedure necessary for performing routine maintenance by replacing the engine oil and oil filter on a Kaw…
How to replace the engine oil and oil filter of the Kawasaki Versys 650
How to replace the engine oil and oil filter of the Kawasaki Versys 650
Versys 650 Today we will discover the instructions that will allow us to perform the ordinary maintenance service, replacing the engine oil and oil filter, of t…
How to replace the motor oil in the Kawasaki Versys 650?
Versys 650 In this tutorial we can see how to replace the motor oil in the Kawasaki Versys 650, an extremely simple and fast operation. First of all, make sure …

How to Replace the Air Filter on a Keeway Matrix 50?

To replace the air filter on a Keeway Matrix 50, open the seat to access the screws securing the glove box located underneath. By unscrewing these screws, you can remove the glove box and access the components underneath: you will need to remove a clip that secures the air filter box, which can now be completely removed. After removal, unscrew the screws holding the cover of the box, detach it completely, and pull out the filter inside; after replacement, reinstall all previously removed components.

Watch the video!


by ScegliAuto

More videos