Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Car's External Wing Mirror

Model: (Various brands) Various
Part: Side mirror

Fitting the external wing mirror on the vehicle is very straightforward. Start the installation process by positioning the internal plastic of the mirror. Once in place, remove the plastic part using a suitable lever tool to avoid damaging the bodywork, and disconnect the small connector. Now take the new plastic part with a new mirror already attached and fit it into the mirror, making sure to connect the small connector first. Insert the mirror and test the movement of the mirror itself.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Today, learn how to remove the external wing mirror from a generic car: the procedure may vary from car to car, but the main steps remain the same fo…
(Various brands) Various Need to replace the mirror glass if damaged? Here’s how to do it. Pry between the edge of the mirror frame and the mirror glass itself (use a plastic…
(Various brands) Various Want to remove the external mirror if it needs replacing? Here’s how to remove the mirror from inside the mirror plastics. Leverage between the perim…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos