Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter on Audi A1.

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Diesel fuel filter

In this video tutorial we can see how it is possible to replace the diesel filter on Audi A1 1.6 TDI, following some simple steps: the first thing to do is to buy a new diesel filter. Next step we have to get in the car and turn off the car and pull the handbrake. Lift the bonnet and secure it with the special rod. To start we need to extract the filter held by three tabs; next step being connected to the two supply pipes, we do a little pressure on the tabs of the connector to remove them. Remove the plastic retainer from the old filter and place the plastic retainer on the new filter, after which we can mount the new filter, fitting it in place and connecting the pipes. Connect the diagnostic tool to purge the fuel system.

Posted on 13 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the pollen filter on Audi A1
How to replace the pollen filter on Audi A1
Audi A1 (2010-2018 / MK 1, 8X) In this video tutorial we can see how it is possible to replace the pollen filter on Audi A1, following some simple steps: the first thing to do is t…
How to replace the cabin air filter of the Audi A1
How to replace the cabin air filter of the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) To correctly replace the cabin air filter in your Audi A1, you need to follow all the steps described below. First of all, reach the front passenger …
Replacement of the cabin air filter for the Audi A1.
Replacement of the cabin air filter for the Audi A1.
Audi A1 (2010-2018 / MK 1, 8X) The following steps will allow us to remove and replace the cabin air filter or pollen filter of the Audi A1. First, let's open the front passenger d…

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos