Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery in the Audi A4 remote control?

Model: Audi A4 B8 - Years 2007-2016
Part: Key

In order to replace the battery of the Audi A4 remote control, it will be necessary to press the button located in the upper part of the device, so that the chromed part and the key are detached. When these two parts have been removed, it will be possible to pull the drawer underneath, also located inside the remote control. The battery positioned inside the drawer can then be completely removed and replaced with a new one. After replacement, the drawer and the key can be inserted again, checking that the device works correctly.

Posted on 28 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery of an Audi A4
How to replace the remote control battery of an Audi A4
Audi A4 (2014-2024 / B9) How to replace the remote control battery of an Audi A4? Let's see how to do it. We take our remote control and press the button to release the metal…
How to replace the battery in the remote control key of an Audi A4
How to replace the battery in the remote control key of an Audi A4
Audi A4 (2000-2004 / B6) Replacing the battery in the remote control key of an Audi A4? Let's see in this video in detail how to proceed. We take our remote control and separ…
Audi A4 remote control battery replacement
Audi A4 remote control battery replacement
Audi A4 (2000-2004 / B6) In this very simple video tutorial we will see how to disassemble and replace the battery of the remote control of the key of an Audi A4. First we ta…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos