Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs in an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Interior dome light bulb

In this tutorial, you will see how to replace the interior light bulbs in an Audi A3, a very simple and quick operation. To do this, you will need a plastic spatula to avoid leaving any marks. First, ensure that the key is not inserted, then lever the spatula around the entire perimeter of the light's frame. Once fully removed, carefully unclip the light itself, extract the faulty bulb, and replace it with a new one, preferably an LED type. Finally, follow the reverse procedure to reassemble everything.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights of the Audi A3
How to replace the rear lights of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to replace the rear lights of the Audi A3 model 8v independently. To perform the replacement of the lights, we need to open…
Replacing the Interior Lights of the Audi A3
Replacing the Interior Lights of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Follow the steps below to remove and replace the bulbs in the interior light of the Audi A3. First, get inside the vehicle and pry off the plastic li…
How to Replace the Interior Light Bulbs on an Audi A3?
How to Replace the Interior Light Bulbs on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To replace the interior light bulbs on an Audi A3, use a lever tool to detach the central ceiling light and then remove the underlying plastic cover.…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos