Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt on an Audi A3.

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: V-belt

If we need to replace the service procedure or the V-belt on this car model, in the description we have provided below, we will find the instructions to follow for a proper replacement. The first thing to do is to lift the car, use a key to loosen the tensioner to loosen the belt. Use your hand to remove the belt from the pulley groove and then remove it. Take the new belt and make sure it follows the correct path before proceeding to reattach the tensioner.

Posted on 19 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the serpentine belt of the Audi A3
Replacement of the serpentine belt of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will see the instructions that will allow us to disassemble and replace the serpentine belt of the Audi A3, in simple and quick steps. First…
How to Replace the Car Serpentine Belt
How to Replace the Car Serpentine Belt
Audi A3 (2003-2013 / MK 2, 8P) The following guide shows how to replace the serpentine belt on your car without needing to call in an external professional. Purchasing it online ca…
How to replace the timing belt of an Audi A3?
How to replace the timing belt of an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) Good morning, today's goal is to replace the timing belt of our Audi A3. Let's start by opening the front hood and removing the air filter system. Th…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos