Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the radio in an Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Warning light – error code

To reset the radio on an Audi A3, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the SETUP and RADIO buttons located below the display of the device. This will cause the radio screen to turn off and then turn back on after a few seconds. After the radio restarts, you will notice that all the settings have been reset to their initial values. Finally, you can release the buttons.

Posted on 13 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the radio on the Audi A3
Disassembly of the radio on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to disassemble the radio of our Audi? Let's see the disassembly of the radio and the assembly of the new one on the Audi A3. Insert the keys into…
How do you reset the radio of the Audi A3?
How do you reset the radio of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To perform a reset of the MMI radio in the Audi A3, you need to turn on the instrument panel using the appropriate key so that you can use the contro…
How do you reset the Audi A3 car radio?
How do you reset the Audi A3 car radio?
Audi A3 (2012-2019 / 8V, MK 3) To reset the Audi A3 car radio, first turn on the instrument panel so that the controls on the center console can be used. In particular, you will ne…

    Frequently Asked Questions

    • A3 2020-2027 - Where is the meaning of the lights on the Audi A3 2021? Read answer

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos