Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Center Display on an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the center display on an Audi A4, use a tool like a screwdriver to pry off the plastic trim around the center screen. This will expose the screws that secure the unit to its housing.

By loosening these screws, you can completely remove the screen and disconnect its connectors from the back. At this point, you can connect the new screen to these connectors.

The new screen can now be inserted into its slot, secured with the screws, and the plastic cover reinstalled.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How do you set the clock in the Audi A4?
How do you set the clock in the Audi A4?
Audi A4 (2007-2016 / B8) The clock of the Audi A4 can be adjusted by inserting the ignition key into the corresponding slot, thus turning on the instrument panel: then you wi…
How to Reset the Tire Pressure Light on an Audi A4
How to Reset the Tire Pressure Light on an Audi A4
Audi A4 (2014-2024 / B9) To reset the tire pressure light on an Audi A4, turn on the ignition by selecting "Car" on the display in the center of the dashboard. You will need …
How to reset the Service light on the Audi A4?
How to reset the Service light on the Audi A4?
Audi A4 (2007-2016 / B8) From the instrument cluster of the Audi A4, you can clear the Service light that appears on the display by turning on the instrument cluster, allowin…

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos