Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Fuse box

In this video, we can see where the fuse boxes of the Audi A4 are located and what their respective diagrams are, which can be useful in case we need to check the fuse of a malfunctioning device. As shown, the first two boxes are located inside the passenger compartment, both behind the side partitions of the dashboard. The third and last box is instead positioned inside the right wall of the trunk, right behind the taillight. Make sure to replace faulty fuses with replacements of the same characteristics and to operate with the vehicle turned off, in order to avoid causing damage.

Posted on 28 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Audi A4 located?
Where are the fuses of the Audi A4 located?
Audi A4 (2004-2008 / B7) On the Audi A4, the fuses are divided into the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it will be possible…
Where are the fuses located in the Audi A4?
Where are the fuses located in the Audi A4?
Audi A4 (2007-2016 / B8) On board the Audi A4, all the fuses will be divided within the appropriate fuse boxes that are installed in the vehicle: in this type of car, it will…
Where are the fuses of the Audi A4 located?
Where are the fuses of the Audi A4 located?
Audi A4 (2000-2004 / B6) The fuses of the Audi A4 are located inside the two fuse boxes inside the vehicle; there is also a small box on the side of the dashboard that contai…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fog light fuse located in the Audi A4? Read answer

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos