Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to replace the Citroen Berlingo alternator

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Starter motor
Operation: How to replace the Citroen Berlingo alternator

For this simple operation it will be necessary to unhook the hood from the special lever to be able to lift it, then for a matter of safety and protection of the more delicate circuits you can disconnect the cables from the battery, so now you can work directly on the motor located under the box. air intake, then remove it by unscrewing the various bolts, then working from the lower part of your car you can reach the motor in question, then disconnect the pin that powers it and consequently unscrew the bolts that secure it, now you just have to install the new one.


Posted on 10 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Berlingo 2018-2028 - Where is the starter motor of the Citroën Berlingo located? Read Answer
    • Berlingo 2018-2028 - Where is the starter motor on the Citroen Berlingo located? Read Answer
    • Berlingo 1996-2013 - Where is the starter motor of the Citroën Berlingo located? Read Answer
    • Berlingo 1996-2013 - Where is the starter motor of the Citroà «n Berlingo located? Read Answer
    • Berlingo 1996-2013 - Where is the starter motor of the Citroen Berlingo located? Read Answer
    • Berlingo 2008-2018 - Where is the starter motor of the Citroen Berlingo located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos