Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light on the Citroen Berlingo/Peugeot Partner

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part:

See other generations:
Video tutorial

The third brake light on the Citroen Berlingo/Peugeot Partner is easily accessible. Open the tailgate and locate the plastic cover on the top of the rear window.

Remove it to access the bulb. If space is insufficient, unscrew the two butterfly screws that secure the light unit.

Disconnect the electrical connector and the washer tube (by pressing the clip). Remove the unit.

To replace the bulb (type G4 or similar), remove the bulb holder and insert the new one. Refit the unit, reconnect the connector and washer tube, tighten the screws, and reattach the cover. The procedure is identical for both models.


Posted on 9 August 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on Citroen Berlingo - Peugeot Partner
Replacing the Diesel Filter on Citroen Berlingo - Peugeot Partner
Citroen Berlingo (1996-2013 / MK 1) In this video tutorial, we will see how to remove the fuel filter on a first series Citroen Berlingo, which is also applicable to the Peugeot Partner…
How to Bleed the Cooling System of the Citroen Berlingo - Peugeot Partner Tepee 1.6 HDi
How to Bleed the Cooling System of the Citroen Berlingo - Peugeot Partner Tepee 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) In this guide, you will discover the instructions on how to bleed the engine cooling system of the Citroen Berlingo, as well as the Peugeot Partner T…
Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner
Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner
Citroen Berlingo (1996-2013 / MK 1) In this tutorial video, you will see how to remove the spare wheel and replace it on the Citroen Berlingo first generation, as well as on the Peugeot…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos