Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on Citroen Berlingo - Peugeot Partner

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Diesel fuel filter

In this video tutorial, we will see how to remove the fuel filter on a first series Citroen Berlingo, which is also applicable to the Peugeot Partner as they share the same engines. First, open the bonnet and remove the plastic cover by taking out the central clip; then disconnect the fuel pipe from the filter by unscrewing the lower nut and let the liquid drain into a container. At this point, disconnect the electrical connector and unclip the side clips to remove the filter cover; simply extract it and replace it with the new one!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) .. panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the front door and start removing the plastic cover of the opening.. …
How to Remove or Configure the Rear Seats of the Citroen Berlingo - Peugeot Partner
How to Remove or Configure the Rear Seats of the Citroen Berlingo - Peugeot Partner
Citroen Berlingo (2008-2018 / MK 2) .. seats of the Citroen Berlingo, as well as the Peugeot Partner. First, open the side doors and the rear tailgate of the boot. Then, lower or recline.. …
Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner
Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner
Citroen Berlingo (1996-2013 / MK 1) .. Berlingo first generation, as well as on the Peugeot Partner. First, open the rear hatch and start by unscrewing the bolt of the spare wheel retaining.. …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos