Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : Diesel filter replacement on a Citroen Berlingo

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Diesel filter
Operation: Diesel filter replacement on a Citroen Berlingo

Replacing the diesel filter of a Citroen Berlingo? Let's see the disassembly of the diesel filter in the engine compartment. We raise the front hood, we identify the diesel filter as in the video. With a large screwdriver we detach the clamps that block the circulation pipes. We unscrew the tightening screws of the diesel filter (we can use a socket wrench), then, remove it. Once the diesel filter has been removed, mount the new filter to the attached fuel oil filter container (connect pipes and electrical cables). We tighten the screws to the diesel filter container, close the front hood. We turn on and test the operation of the Berlingo vehicle.


Posted on 16 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos