Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fuel Filter on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Fuel filter

In this video, we will see how to change the fuel filter on a Citroen Berlingo: first, remove the engine cover, then take off the inlet and outlet hoses of the filter, which is located just beneath the cover. Also, remove the retaining ring that holds it in place. Now, using the tip of a screwdriver, you can take off the cover. Always wear gloves for this type of operation, and grip the filter by its centre and pull it out. Place it in a bowl and use a large syringe to suck out the remaining fuel from the container, which we will clean thoroughly. Change the seal on the filter cap (this is always advisable) and replace the filter, securing it with the ring, hoses, and inlet. Manually pump some petrol to fill the filter and start the engine. Operation completed.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel filter of the Citroen Berlingo 1.6 HDI
How to replace the diesel filter of the Citroen Berlingo 1.6 HDI
Citroen Berlingo (2008-2018 / MK 2) In this short guide we will see the instructions that will allow us to disassemble and replace the diesel filter of the Citroen Berlingo 1.6 HDI. Fir…
How do you replace the diesel filter of the Citroën Berlingo?
How do you replace the diesel filter of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To replace the fuel filter of the Citroën Berlingo, you need to open the hood so that you can access the components located inside the engine compart…
How to replace the diesel filter in the Citroen Berlingo?
How to replace the diesel filter in the Citroen Berlingo?
Citroen Berlingo (1996-2013 / MK 1) In this tutorial, we can see how to replace the fuel filter in the Citroen Berlingo, an extremely simple and quick operation. First of all, we wait f…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos