Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Oil Pump from Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Pump

In this video tutorial, you will see the instructions for accessing and removing the oil pump from a first-generation Citroen Berlingo. First, lift the vehicle and remove the oil drain bolt, allowing it to flow into a container; then remove the right front wheel and also take off the wheel arch liner by unscrewing the screws. Next, remove the lower pulley by taking off the belt, and unscrew all the fixing screws of the pump; then extract the impeller and remove the oil sump and subsequently the pump, following the video to the end!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Citroën Berlingo
Replacing the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and st…
Where Are the Fuses on the Citroën Berlingo?
Where Are the Fuses on the Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) On the Citroën Berlingo, all fuses are located inside the designated fuse boxes installed in the vehicle: in this type of vehicle, the first box is p…
Removing the Boot Lock on a Citroen Berlingo
Removing the Boot Lock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today's instructions will show you the steps to remove and replace the boot lock on the Citroen Berlingo. First, open the tailgate and begin to remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos