Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Washer Fluid Tube on the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

See other generations:
Video tutorial

Below are the steps that will allow you to remove and replace the windscreen washer fluid tube, connected between the washer pump and the nozzles, on the Citroen Berlingo. First, open the vehicle's bonnet and start disconnecting the tubing from the washer nozzles; then remove the front right wheel arch and disconnect the tube from the washer pump to remove it, as illustrated in the video.

At this point, replace and install the new windscreen washer fluid tube, then top up the fluid, following the video tutorial to the end!


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Replacing the Third Brake Light on the Citroen Berlingo/Peugeot Partner
Replacing the Third Brake Light on the Citroen Berlingo/Peugeot Partner
Citroen Berlingo (2008-2018 / MK 2) The third brake light on the Citroen Berlingo/Peugeot Partner is easily accessible. Open the tailgate and locate the plastic cover on the top of the …
How to Replace the Radiator Fluid on Citroen Berlingo HDI 1
How to Replace the Radiator Fluid on Citroen Berlingo HDI 1
Citroen Berlingo (1996-2013 / MK 1) In this video, we will see how to bleed and replace the radiator fluid on a first series Citroen Berlingo HDI. First, open the bonnet of the vehicle …
Where is the Fuse Box Located on the Citroen Berlingo?
Where is the Fuse Box Located on the Citroen Berlingo?
Citroen Berlingo (1996-2013 / MK 1) The Citroen Berlingo produced from 2003 to 2012 has two fuse boxes. The first fuse box is located under the bonnet, specifically near the battery, an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos