Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid on Citroen Berlingo HDI 1

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Antifreeze coolant

In this video, we will see how to bleed and replace the radiator fluid on a first series Citroen Berlingo HDI. First, open the bonnet of the vehicle and remove the plastic engine cover; then open the cap of the radiator fluid reservoir and disconnect the hose located under the radiator, as shown in the video. After draining all the fluid, refill with new fluid up to the maximum level indicated on the reservoir; then start the engine to circulate the new coolant!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on the Citroen Berlingo 1.6 HDI
Replacing the Diesel Filter on the Citroen Berlingo 1.6 HDI
Citroen Berlingo (2008-2018 / MK 2) Today's guide will show you the steps to remove and replace the diesel filter on the Citroen Berlingo 1.6 HDI. First, open the bonnet of the vehicle …
Where is the location of the EOBD port on the Citroen Berlingo 1.6 HDi?
Where is the location of the EOBD port on the Citroen Berlingo 1.6 HDi?
Citroen Berlingo (2008-2018 / MK 2) Let's see in this video where the EOBD (European On Board Diagnostic) connector is located on the Renault Berlingo 1.6 HDI. It is the port used to co…
When and How to Change the Timing Belt on a Citroen Berlingo
When and How to Change the Timing Belt on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below are the details on when and how to replace the timing belt on a Citroen Berlingo; for the 1.6 HDI engine, the manufacturer recommends replacing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos